Universal attachment
For the CatrosXL 4003-2 to 6003-2 3-point linkage mounted models, attachment possibilities of 3N, 3 and 4N are avail-able. The CatrosXL 4003-2TS to 6003-2TS trailed models are equipped with the bogey chassis and drawbar can be pulled with a Category 3 – 5 lower link cross shaft or, alternatively, a K80 ball coupling or various drawbar eyes, depending on the tractor. These attachment options for the trailed TS variant are also available for the two CatrosXL 7003-2TX and CatrosXL 8003-2TX models. For a high degree of customer flexibility with varying tractors, the different attachment options can be quickly replaced via the connecting flange if required. When working with the various different categories of lower link attachment, the drawbar cross shaft remains on the machine as only the pins need to be exchanged.

Perfect working quality even in areas containing a lot of organic matter
Due to the large 610 mm discs and the greater distances between the first and second row of discs and between the second row of discs and the roller, the CatrosXL excels, above all, by its high level of passage. Whether in maize stubble or when working in catch crops: The CatrosXL models currently being introduced, with a working width of up to 8 m, combined with high forward speeds of up to 18 km/h, stand for maximum output with perfect working quality and the minimum of fuel consumption. In addition to the coarse-serrated 610 mm discs for dry and heavy ground, customers can also choose the fine-serrated 610 mm option. This ensures a full-surface cut and a maximum crumbling effect, e.g. during seedbed preparation, even in cases of extremely shallow working depths.

The discs, which are individually suspended on sprung rubber mountings, ensure perfect soil contour following. The rubber elements have a special profile, with a high release force, so that the large discs maintain their working depth even under the toughest of conditions. The specially moulded, cast disc arm on the CatrosXL has been redesigned to meet the increased demands and guides the disc at a consistent depth through the soil under all conditions.

In order to further improve the contour following on the larger working widths with the Catros 7003-2TX and Catros 8003-2TX, these machines can be optionally equipped with the ContourFrame, which is uniquely placed in the market. The two wings of the disc harrow unit are hydraulically preloaded and can therefore adapt upwards and downwards to any unevenness in the ground.

With the proven disc spacing of 25 cm within a row of discs, even large amount of crop residues can pass through the machine without any problems. The overlap spacing of 12.5 cm also ensures the complete movement of the entire soil surface. The special angle of attack of the front row of discs at 17° and the rear row of discs at 14° to the direction of travel ensure consistent, straight running behind the tractor, as well as an ideal mixing of harvest residues with the lowest tractive power requirement. In addition, this ensures a reliable soil penetration even under the toughest of conditions. The disc bearings, with maintenance-free face seal and lifetime lubrication, are well-known across the complete Catros product range and have proven themselves a million times over. They are larger in diameter to meet the increasing demands of covering bigger areas than in the case of the 100 mm smaller diameter discs on the Catros+ models.

Working depth adjustment
The working depth adjustment of the disc element is carried out by rotating the disc arms around the rectangular tube carrier. A connection between the two rows of discs in the machine ensures that both rows always work at the same depth. By using this type of adjustment, the entire machine always stays parallel to the ground, whereby both rows of discs always work at the same depth even in instances where the working depth is changed and thus prevents the machine from being slanted as a result of a change in working depth. In addition, when the working depth increases, the clearance between the disc element and the roller increases so that, even at larger working depths and the movement of more soil, sufficient clearance is available in front of the roller so that the earth in front of the roller can settle again.

Adjustment of the working depth is infinitely variable and can be carried out mechanically using adjustable spindles on the machine or hydraulically from the cab during operation for maximum comfort. All pivot points on the disc element are maintenance-free. The height of the side discs of the machines can be adjusted separately, which ensures a level working profile even on the match up between bouts.

Running gear for transport – TS or TX
The folding CatrosXL 4003-2, 5003-2 and 6003-2 models in working widths of 4 m, 5 m and 6 m can be carried on the 3-point linkage or specified in the trailed TS variant with bogey chassis and drawbar. The CatrosXL-2TS is characterised by a high degree of smoothness in work because the running gear can be completely swivelled up over the frame. In addition, the weight of the running gear ensures the uniform penetration of the discs into the soil even under the toughest of conditions. As standard, models with TS running gear have an anti-vibration function, which can be activated under certain conditions, to ensure the smooth running of CatrosXL-2TS. When manoeuvring, the machine can be turned on the roller in order to achieve quick headland turn-round times and high work rates.

The 7 and 8 m wide CatrosXL 7003-2TX and CatrosXL 8003-2TX models have an integrated centre running gear. Thanks to the optimum weight distribution, the machines can be transported safely on the road. At the same time, the position of the running gear offers maximum driving comfort due to the high manoeuvrability on the headland. The running gear can be equipped with over-dimensioned 700 mm tyres so that the ground pressure during manoeuvring is minimised and the self-driving effect of the wheels is guaranteed, even in very sandy or wet locations.

Optimum reconsolidation for all soils
11 different rollers are available for the new CatrosXL, which means that AMAZONE can offer the ideal roller, both for reconsolidation and for depth control of the machine, depending on the type of soil and soil conditions. For light land locations, for example, a U-profile roller or double-U profile roller is available. On medium to variable soils, the wedge ring roller or wedge ring roller with matrix tyre profile is the ideal solution since water is kept in the soil due to the strip-wise reconsolidation, but water can still seep into the loose strips during high rainfall and the risk of erosion or soil capping is minimised. AMAZONE offers a solution for heavy ground and clay soils with the disc roller or double disc roller. These combine a high crumbling effect, good self-driving effect and load-bearing capacity with high insensitivity to stones. Particularly for a secondary stubble cultivation or for seedbed preparation, trailing tine harrows are also available for many rollers.

Wide selection of additional pre-working tool
Depending on whether the machine has a bogey chassis or centre running gear, various pre-working tools are available for the CatrosXL. From choice, with Catros 4003-2TS to 6003-2TS, a straw harrow, knife roller, Crushboard or support wheels can be mounted in front of the disc element. With the knife roller, extreme quantities of standing harvest residues, such as maize or sunflower stubbles, can be crushed before being mixed in with subsequent disc element. The decomposition process is accelerated and field hygiene is significantly improved. The height adjustment of the crushboard and straw harrow can be carried out mechanically or comfortably from the tractor seat using a hydraulic spool valve. Depending on whether the organic matter needs to be crushed, the knife roller is hydraulically swung in or out of work from the cab.

AMAZONE also provides a knife roller in front of the disc element for the CatrosXL 7003-2TX and CatrosXL 8003-2TX models. In addition, the Crushboard can be mounted in front of the disc element and/or between the second row of discs and the roller. Equipped with the optional 610 mm diameter, fine-serrated discs, the machine is ideal for seedbed preparation.

Other optional extras include a robust toolbox, an area meter or the new universally-mounted AMAZONE GreenDrill 501 catch crop seeder box. This can be mounted on all trailed CatrosXL units and enables stubble cultivation and catch crop seeding to be carried out in a single pass. If tank capacities of more than 500 l are required for larger areas, all trailed CatrosXL models can be equipped with a conveyor section for seeds which places the seed in front of the roller. In combination with the XTender rear tank or the FTender front tank, high outputs can then be achieved with minimum downtime.